SALBP16S/B1 LS

	Temporarily sold out
	Worldwide shipping from the Netherlands
	30 days return policy
	Track your order through Track & Trace

SALBP16S/B1 LS

Rod end

Stock	not in stock
Brand	LS
Article number	SALBP16S/B1 LS
Inside diameter	16,00mm
Outside diameter	38,00mm
Width	21,00mm

Product description

The SALBP16S/B1 LS is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The SALBP16S/B1 LS has a spherical plain bearing with a steel-on-bronze sliding contact. The steel inner ring contacts the bronze surface of the outer ring. The steel-on-bronze sliding contact makes this bearing highly wear-resistant, providing low friction. However, the load capacity is slightly lower compared to spherical plain bearings with steel-on-steel sliding contacts. This bearing needs regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.