|Guaranteed same day shipment on orders placed before 17.00h (CEST)|
|This product is available from stock|
|No account required|
|14 days return policy|
|Track your order through Track & Trace|
The N208E.M1 FAG bearing is a single row cylindrical roller bearing with a brass cage, a cylindrical bore and no seal.
|Article number||N208E.M1 FAG|
Single row cylindrical roller bearings with cage, like the N208E.M1 FAG, are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.
The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs.
The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process.
Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity.
Cylindrical roller bearings N are non-locating bearings and can support radial forces only. Bearings N have two ribs on the inner ring and an outer ring without ribs.
Axial displacement: The outer and inner ring can be axially displaced relative to each other from the central position by the value “s”.
The bearings are supplied without seals.
They can be lubricated from the end faces using grease or oil.
Single row cylindrical roller bearings with cage can be used at operating temperatures from –30 °C to +150 °C.
The suffix M1 indicates bearings with brass cages guided by rollers.