6308-2ZN1/C4S0WT SKF

All dimensions

1. Inner (d) MM 40
2. Outer (D) MM 90
3. Width (B) MM 23
4. Inner (d) Inch 1.5748
5. Outer (D) Inch 3.5433
6. Width (B) Inch 0.9055

Suffix description

1. 2Z Shield Of Pressed Sheet Steel On Both Sides Of The Bearing
2. N1 One locating slot in outer ring
3. C4 Bearing Internal Clearance Greater Than C3
4. S0 Bearing Rings Or Washers Dimensionally Stabilized For Use At Operating Temperatures Up To +150°C (302°F)
5. WT Grease Fill For Low As Well As High Temperature e.g. Range -40 ~ 160°C. WT Or A Two-Figure Number Following WT Identifies The Actual Grease. An Additional Letter Or Letter/ Figure Combination As Mentioned Under “HT” Identifies Filling Degrees Other Than Standard

Technical details

1. Availability 0 pcs
2. Brand SKF
3. Item number 6308-2ZN1/C4S0WT SKF
4. Also known as 6308-2ZN1/C4
   
5. Category Deep Groove Ball Bearings Single Row

Weight and Dimensions

1. Weight (kg) 0.643

Product Properties

1. Bore C - Cylindrical Bore
2. Seal ZZ/2Z - Steel Seal on Two Sides
3. Cage Type S - Steel or Standard Cage
4. External Modification N1 - 1 Locking Groove in Outer Ring
5. Radial Internal Play C4 Internal Play (Higher than C3)
6. Precision Standard Precision
7. Lubrication High Temperature Grease
8. Heat Stabilization S0 - Temperatures up to 150 °C
9. Special Treatment No Special Treatment