ZSL192318-TB-XL INA

Alle Abmessungen

1. Innen (d) mm 90
2. Außen (D) mm 190
3. Breite (B) mm 64
4. Innen (d) Zoll 3.5433
5. Außen (D) Zoll 7.4803
6. Breite (B) Zoll 2.5197

Suffixbeschreibungen

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. XL X-Life

Technische Daten

1. Verfügbarkeit 3 St.
2. Marke INA
3. Item number ZSL192318-TB-XL INA
4. Also known as NJ2318-E-MPAX-ILR
   NJ2318-E-XL-MPAX-ILR
   ZSL192318-TB
   
5. Category Zylinderrollenlager einreihig

Gewicht und Abmessungen

1. Gewicht (kg) 8.44

Produkteigenschaften

1. Bohrung C – Zylindrische Bohrung
2. Dichtung Keine Dichtung
3. Käfigtyp TB – Hartfaserkäfig
4. Externe Modifikation Keine Externe Modifikation
5. Interne Radialluft Cn Normale Innenluft
6. Präzision Standardpräzision
7. Wärmestabilisierung Keine Wärmestabilisierung - Temperaturen bis 120°C

Angaben von Schaeffler (medias)

1. Radial Static Load Rating C0r (N) 610000
2. Radial Dynamic Load Rating Cr (N) 590000
3. ECLASS number 23-05-09-01
4. ECLASS2 number 23-05-09-01
5. Medias beschreibung Zylinderrollenlager ZSL1923 mit Zwischenstücken, 1-reihig, Stützlager, 2 Borde am Außenring, 1 Bord am Innenring, Zwischenstücken, Bauform ZSL1923

Downloads und Links

1. X-life Broschüre X-life Broschüre
2. Link to manufacturer Link to manufacturer