SL185052-TB-C3-2S INA

Alle Abmessungen

1. Innen (d) mm 260
2. Außen (D) mm 400
3. Breite (B) mm 190

Suffixbeschreibungen

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimized And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. C3 Internal Clearance Larger Than Normal
3. 2S Bearings Matched In Set Of Two For Side-By-Side Mounting, Tolerance Is Matched Based On The Inner, Outer And Clearance Of The Bearing, Order Quantity (pieces) Is 2 For One Set

Technische Daten

1. Verfügbarkeit 0 St.
2. Marke INA
3. Item number SL185052-TB-C3-2S INA
4. Also known as 0535298800034
   
5. EAN 4054364587567
6. Category Zweireihig Zylinderrollenlager

Gewicht und Abmessungen

1. Gewicht (kg) 85.5

Produkteigenschaften

1. Bohrung C – Zylindrische Bohrung
2. Dichtung Keine Dichtung
3. Käfigtyp FC – Vollrollig, käfiglos
4. Externe Modifikation Keine Externe Modifikation
5. Interne Radialluft C3 Innenluft (größer als Cn)
6. Präzision Set of Two for Side-by-Side
7. Wärmestabilisierung Keine Wärmestabilisierung - Temperaturen bis 120°C

Downloads und Links

1. Link to manufacturer Link to manufacturer