LSL192332-TB INA

Alle Abmessungen

1. Innen (d) mm 160,00
2. Außen (D) mm 340,00
3. Breite (B) mm 114,00
4. Innen (d) Zoll 6.2992
5. Außen (D) Zoll 13.3858
6. Breite (B) Zoll 4.4882

Suffixbeschreibungen

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower

Technische Daten

1. Verfügbarkeit 0 St.
2. Marke INA
3. Item number LSL192332-TB INA
4. Also known as 0535322440000
   NJ2332-E-MPAX-ILR
   NJ2332-E-XL-MPAX-ILR
   
5. EAN 4047643338936
6. Category Zylinderrollenlager einreihig

Gewicht und Abmessungen

1. Gewicht (kg) 48.1

Produkteigenschaften

1. Bohrung C – Zylindrische Bohrung
2. Dichtung Keine Dichtung
3. Käfigtyp S – Stahl- oder Standardkäfig
4. Externe Modifikation Keine Externe Modifikation
5. Interne Radialluft Cn Normale Innenluft
6. Präzision Standardpräzision
7. Wärmestabilisierung Keine Wärmestabilisierung - Temperaturen bis 120°C

Angaben von Schaeffler (medias)

1. Radial Static Load Rating C0r (N) 2010000
2. Radial Dynamic Load Rating Cr (N) 1600000
3. ECLASS number 23-05-09-01
4. ECLASS2 number 23-05-09-01
5. Medias beschreibung Zylinderrollenlager LSL1923 mit Scheibenkäfig, 1-reihig, Stützlager, 2 Borde am Außenring, 1 Bord am Innenring, 1Scheibenkäfig, Bauform LSL1923

Downloads und Links

1. Link to manufacturer Link to manufacturer