LSL192330-TB-C3 INA

Alle Abmessungen

1. Innen (d) mm 150,00
2. Außen (D) mm 320,00
3. Breite (B) mm 108,00
4. Innen (d) Zoll 5.9055
5. Außen (D) Zoll 12.5984
6. Breite (B) Zoll 4.2520

Suffixbeschreibungen

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. C3 Internal Clearance Larger Than Normal

Technische Daten

1. Verfügbarkeit 6 St.
2. Marke INA
3. Item number LSL192330-TB-C3 INA
4. Also known as 0533450530030
   NJ2330-E-MPAX-ILR-C3
   NJ2330-E-XL-MPAX-ILR-C3
   
5. EAN 4054363034611
6. Category Zylinderrollenlager einreihig

Gewicht und Abmessungen

1. Gewicht (kg) 40.7

Produkteigenschaften

1. Bohrung C – Zylindrische Bohrung
2. Dichtung Keine Dichtung
3. Käfigtyp S – Stahl- oder Standardkäfig
4. Externe Modifikation Keine Externe Modifikation
5. Interne Radialluft C3 Innenluft (größer als Cn)
6. Präzision Standardpräzision
7. Wärmestabilisierung Keine Wärmestabilisierung - Temperaturen bis 120°C

Angaben von Schaeffler (medias)

1. ECLASS number 23-05-09-01
2. ECLASS2 number 23-05-09-01

Downloads und Links

1. Link to manufacturer Link to manufacturer