TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
BRBlack Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
C3Internal Clearance Larger Than Normal
Technische Daten
Verfügbarkeit3 St.
MarkeINA
Item numberLSL192330-TB-BR-C3 INA
Also known as
LSL192330-A-C3
LSL192330-B-C3
LSL192330-TB-C3
CategoryZylinderrollenlager einreihig
Gewicht und Abmessungen
Gewicht (kg)40.7
Produkteigenschaften
BohrungC – Zylindrische Bohrung
DichtungKeine Dichtung
KäfigtypS – Stahl- oder Standardkäfig
Externe ModifikationKeine Externe Modifikation
Interne RadialluftC3 Innenluft (größer als Cn)
PräzisionBR - Black Finishing
WärmestabilisierungKeine Wärmestabilisierung - Temperaturen bis 120°C