LSL192322-TB-BR-XL-C3 INA

Alle Abmessungen

1. Innen (d) mm 110,00
2. Außen (D) mm 240,00
3. Breite (B) mm 80,00
4. Innen (d) Zoll 4.3307
5. Außen (D) Zoll 9.4488
6. Breite (B) Zoll 3.1496

Suffixbeschreibungen

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
3. XL X-Life
4. C3 Internal Clearance Larger Than Normal

Technische Daten

1. Verfügbarkeit 0 St.
2. Marke INA
3. Item number LSL192322-TB-BR-XL-C3 INA
4. Also known as LSL192322-TB-BR-C3
   
5. Category Zylinderrollenlager einreihig

Gewicht und Abmessungen

1. Gewicht (kg) 17.3

Produkteigenschaften

1. Bohrung C – Zylindrische Bohrung
2. Dichtung Keine Dichtung
3. Käfigtyp S – Stahl- oder Standardkäfig
4. Externe Modifikation Keine Externe Modifikation
5. Interne Radialluft C3 Innenluft (größer als Cn)
6. Präzision BR - Black Finishing
7. Wärmestabilisierung Keine Wärmestabilisierung - Temperaturen bis 120°C

Downloads und Links

1. X-life Broschüre X-life Broschüre