SL183040-TB Kugel & Rollenlager Werk

Afmetingen

1. Binnenmaat (d) mm 200
2. Buitenmaat (D) mm 310
3. Breedte (B) mm 82
4. Binnenmaat (d) inch 7.874
5. Buitenmaat (D) inch 12.2047
6. Breedte (B) inch 3.2283

Suffix-omschrijving

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower

Technische specificaties

1. Beschikbaarheid 0 stuks
2. Merk Kugel & Rollenlager Werk
3. Item number SL183040-TB Kugel & Rollenlager Werk
4. Category Eenrijig cilinderrollager

Gewicht en afmetingen

1. Gewicht (kg) 21.8

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting Geen afdichting
3. Type kooi FC - volrollig, geen kooi
4. Externe aanpassing Geen Externe Aanpassing
5. Interne radiale speling Cn normale interne speling
6. Precisie Standaardprecisie
7. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C