SL1828/950-TB-N1-BR-SP5-CN/3L-IT INA

Suffix-omschrijving

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. N1 One Locating Slot (Notch) In One Outer Ring Side Face Or Housing Washer
3. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
4. SP5 Increased Accuracy (Partly P5)
5. CN/3L
6. CN Normal Radial Internal Clearance. +
7. /3L Clearance Range Corresponding To The Lower Part Of 1/3 Of The Normal (CN) Clearance Range. Can Be Used As A Standard CN
8. IT Inner Ring Mounted Inverted (Turned 180°)

Technische specificaties

1. Beschikbaarheid 0 stuks
2. Merk INA
3. Artikelnummer SL1828/950-TB-N1-BR-SP5-CN/3L-IT INA
4. Ook bekend als 0572460333107
   
5. EAN 4012802610086
6. Categorie Eenrijig cilinderrollager

Producteigenschappen

1. Precisie P5 precisie (hoger dan P6)
2. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C

Downloads en links

1. Link to Manufacturer Link to Manufacturer