SL1828/950-TB-N1-BR-SP5-CN/3L INA

Afmetingen

1. Binnenmaat (d) mm 950
2. Buitenmaat (D) mm 1150
3. Breedte (B) mm 118
4. Binnenmaat (d) inch 37.4016
5. Buitenmaat (D) inch 45.2756
6. Breedte (B) inch 4.6457

Suffix-omschrijving

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. N1 One Locating Slot (Notch) In One Outer Ring Side Face Or Housing Washer
3. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
4. SP5 Increased Accuracy (Partly P5)
5. CN/3L
6. CN Normal Radial Internal Clearance. +
7. /3L Clearance Range Corresponding To The Lower Half Of The Normal (CN) Clearance Range

Technische specificaties

1. Beschikbaarheid 2 stuks
2. Merk INA
3. Item number SL1828/950-TB-N1-BR-SP5-CN/3L INA
4. Category Eenrijig cilinderrollager

Gewicht en afmetingen

1. Gewicht (kg) 253

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting Geen afdichting
3. Type kooi FC - volrollig, geen kooi
4. Externe aanpassing N1 - 1 vergrendelingsgroef in buitenring
5. Interne radiale speling Lower Half of Normal Clearance
6. Precisie P5 precisie (hoger dan P6)
7. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C