SL1818/530-E-TB-BR-IR/T-CN/3L INA

Afmetingen

1. Binnenmaat (d) mm 530
2. Buitenmaat (D) mm 650
3. Breedte (B) mm 56
4. Binnenmaat (d) inch 20.8661
5. Buitenmaat (D) inch 25.5906
6. Breedte (B) inch 2.2047
7. Breedte (b) mm 56

Suffix-omschrijving

1. E Increased Load Capacity
2. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
3. BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
4. IR/T Grooves In Inner Ring Are On The Side Of The Circlip
5. CN/3L
6. CN Normal Radial Internal Clearance. +
7. /3L Clearance Range Corresponding To The Lower Part Of 1/3 Of The Normal (CN) Clearance Range. Can Be Used As A Standard CN

Technische specificaties

1. Beschikbaarheid 0 stuks
2. Merk INA
3. Item number SL1818/530-E-TB-BR-IR/T-CN/3L INA
4. Also known as 0581552870504
   
5. EAN 4012802514742
6. Category Eenrijig cilinderrollager

Gewicht en afmetingen

1. Gewicht (kg) 38.5

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting Geen afdichting
3. Type kooi FC - volrollig, geen kooi
4. Externe aanpassing Geen Externe Aanpassing
5. Interne radiale speling Lower Half of Normal Clearance
6. Precisie BR - Black Finishing
7. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C

Data van Schaeffler (medias)

1. Basis statische radiale belasting (C 0r) 2170000
2. Grenstoerental (n G) 510
3. Referentiesnelheid (n ϑr) 320

Downloads en links

1. Download datasheet Download datasheet
2. Link to Manufacturer Link to Manufacturer