LSL192336-TB-C3-2S INA

Afmetingen

1. Binnenmaat (d) mm 180
2. Buitenmaat (D) mm 380
3. Breedte (B) mm 126
4. Binnenmaat (d) inch 7.0866
5. Buitenmaat (D) inch 14.9606
6. Breedte (B) inch 4.9606

Suffix-omschrijving

1. TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimized And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
2. C3 Internal Clearance Larger Than Normal
3. 2S Bearings Matched In Set Of Two For Side-By-Side Mounting, Tolerance Is Matched Based On The Inner, Outer And Clearance Of The Bearing, Order Quantity (pieces) Is 2 For One Set

Technische specificaties

1. Beschikbaarheid 0 stuks
2. Merk INA
3. Artikelnummer LSL192336-TB-C3-2S INA
4. Categorie Eenrijig cilinderrollager

Gewicht en afmetingen

1. Gewicht (kg) 67.4

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting Geen afdichting
3. Type kooi S - stalen of standaard kooi
4. Externe aanpassing Geen Externe Aanpassing
5. Interne radiale speling C3 interne speling (hoger dan Cn)
6. Precisie Set of Two for Side-by-Side
7. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C