3202-BD-XL-2HRS-TVH-NR-L091 FAG

Afmetingen

1. Binnenmaat (d) mm 15
2. Buitenmaat (D) mm 35
3. Breedte (B) mm 15,9
4. Binnenmaat (d) inch 0.5906
5. Buitenmaat (D) inch 1.378
6. Breedte (B) inch 0.626

Suffix-omschrijving

1. BD Modified Internal Construction, Contact Angle α=30°, Without Filling Slot
2. XL X-Life
3. 2HRS Lip Seals On Both Sides Made From Nitrile Butadiene Rubber, These Designs Are Lubricated For Life Using A High Quality Grease And Are Suitable For Moderate Speeds. The Frictional Torque And Heat Generation Are Lower Than With The Previous RSR Seal
4. TVH Moulded Polyamide Cage Snap-Type, Rolling Element Riding
5. NR Snap Ring Groove In Bearing Outer Ring And Appropriate Snap Ring
6. L091 Optimized Grease For All Purposes, Temperature Range Approximately -50 ~ 120°C - Description: Isoflex® LDS 18 Special A)-Is A Dynamically Light Long-Term Grease For Plain And Rolling Bearings. It Consists Of Ester Oil, Mineral Oil And Lithium Soap. The Product Is Resistant To Ageing, Oxidation And Water, And It Protects Reliably Against Corrosion. Application: Isoflex® LDS 18 Special A Is Suitable For Plain And Rolling Bearings Operating At Low Temperatures And/Or High Speeds, For Example In Grinding Spindles, Machine Tool Spindles, Spindle Bearings, Textile Spindles, Bearings In Oe-Spinning Turbines, Bearings In Precision And Optical Equipment

Technische specificaties

1. Beschikbaarheid 0 stuks
2. Merk FAG
3. Item number 3202-BD-XL-2HRS-TVH-NR-L091 FAG
4. Also known as 0702200500000
   
5. EAN 4012802645392
6. Category Tweerijig hoekcontactkogellager

Gewicht en afmetingen

1. Gewicht (kg) 0.06

Producteigenschappen

1. Boring C - cilindrische boring
2. Afdichting 2RH - hogesnelheidsafdichting met lage wrijving aan twee zijden
3. Type kooi P - kunststof gegoten kooi
4. Externe aanpassing NR - groef en borgring
5. Interne radiale speling Cn normale interne speling
6. Precisie Standaardprecisie
7. Smering 9 - Isoflex Lithium Grease
8. Warmtestabilisatie Geen warmtestabilisatie - temperaturen tot 120 °C
9. Gedeelde binnenring/buitenring Standaard

Downloads en links

1. Link to manufacturer Link to manufacturer